User Contributed                                            MET/CAL Procedure
=============================================================================
INSTRUMENT:            ESI SR1:Stanard Resistor
DATE:                  13-Jun-95
AUTHOR:                User Contributed
REVISION:              0
ADJUSTMENT THRESHOLD:  70%
NUMBER OF TESTS:       3
NUMBER OF LINES:       36
CONFIGURATION:         Datron 1281
=============================================================================
 STEP    FSC    RANGE NOMINAL        TOLERANCE     MOD1        MOD2  3  4 CON
  1.001  ASK-   R     N              P             M              F        W
  1.002  ASK+                                          X
  1.003  HEAD         ÍÍ INITIAL CONDITIONS ÍÍ
  1.004  IEEE         [@1281]*RST
  1.005  DISP         Connect the UUT to the Datron in a four wire
  1.005  DISP         configuration.
  1.006  HEAD         {}
  1.007  HEAD         {ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»}
  1.008  HEAD         {º Resistance Calibration º}
  1.009  HEAD         {ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ}
  1.010  HEAD         ÍÍ Resistance Calibration ÍÍ
  1.011  JMP          2.001
  1.012  EVAL
  2.001  MEMI         Enter the nominal value for the standard resistor.
  2.002  ACC          Z              60.00P%
  2.003  IEEE         [@1281]OHMS FWR,AUTO
  2.004  IEEE         [@1281][D2000]RDG?[I]
  2.005  MEME
  2.006  MEMC         Z              0.01%
  3.001  HEAD         {}
  3.002  DISP         {ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»}
  3.002  DISP         {º THIS COMPLETES THE VERIFICATION º}
  3.002  DISP         {ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ}
  3.003  END